No, it is just very hard to turn, especially if someone else tightens it. I had to use an extension on my
ratchet.
Is a hub nut reverse thread
Left are reverse threaded.
No it is not reverse thread. The passenger side rear spindle is the reverse thread on 88-93 festivas.
left hand thread
NO
standard thread on the 99 model with 4.0 liter.
No.
With the tool, while they call this a flywheel puller it is a reverse thread nut, with a normal thread bolt in the center. After removing the nut holding on the mag, reverse thread the tool , then tighten the bolt in the center, off comes the mag.
No, turn counterclockwise to remove.
The Thread size is 18X1.5 MM Recommended filter is Wix Filter # 51040
No it is normal clockwise thread. It is normally very tight.
right thread is what your looking for,that's the common one.or goes on clockwise.