Yes, It has been experimentally proved that shaolin monks can actually demonstrate this effect. In the reality show Fight Science, it was tested on a shaolin monk using experimental techniques such as accelerometers. A force of 400 pounds was applied on his body but he was unhurt albeit this force can easily kill a normal man. Also, the volunteer monk was not muscular but a lean, thin person so it can't be assumed that his muscularity saved him.
According to him, It was his life force (Qi) which he concentrated in his torso during the hit which saved him from the fatal blow.
Iron is to shirt as steam is to pants.
To iron a polo shirt, lay it flat and iron the front. If the sleeves are long, lay them flat on the ironing board on each side of the torso of the shirt and iron them. Then, flip the shirt over and iron the back.
The iron is hotter than the shirt Heat flows easily from higher temperature to lower temperature region. Iron is at high temperature and shirt is at lower temperature.
The iron is hotter than the shirt Heat flows easily from higher temperature to lower temperature region. Iron is at high temperature and shirt is at lower temperature.
The iron is hotter than the shirt Heat flows easily from higher temperature to lower temperature region. Iron is at high temperature and shirt is at lower temperature.
Heat travels from the iron to the shirt through a process called conduction. The iron is hot because of its internal heating element, and when it touches the shirt, the molecules in the iron collide with the molecules in the shirt, transferring heat energy to smooth out the fabric and remove wrinkles.
Heat travels from the iron to the shirt through a process called conduction. The iron is hotter than the shirt, so heat naturally flows from the higher temperature object to the lower temperature object. As the hot iron comes into contact with the shirt, the molecules in the shirt absorb the heat energy, causing them to move more rapidly and relax, thereby removing the wrinkles.
Place the print face down on an ironing board, place the t-shirt over it, and iron through the t-shirt with a hot (not warm) iron. Do not iron the print directly - or you will melt it.
If you iron on a shirt, the item you ironed on may come off depending on the heat of the iron, the material of the shirt, and the durability of the item. It is recommended to follow the instructions for ironing on the item to ensure it stays secure on the shirt.
The iron is hotter than the shirt Heat flows easily from higher temperature to lower temperature region. Iron is at high temperature and shirt is at lower temperature.
A t-shirt with a silkscreen image can be ironed inside-out so that when the hot iron is placed on the image, the image does not melt or come away from the t-shirt. The iron is turned low and the iron is very lightly pressed on the t-shirt, moving slowly and smoothly across the t-shirt.
Sateen shirts are typically no iron, but if it looks a tad wrinkly out of the dryer use low heat on the iron, and give your shirt a good once over.