You will not get a good bond - the new tiles will fall off in short order
Yes, you can tile over an existing tile floor as long as the existing tiles are in good condition and properly prepared. It is important to ensure that the surface is clean, smooth, and free of any loose tiles or debris before tiling over it. Additionally, using the right adhesive and grout for the new tiles is crucial for a successful installation.
I have tiled over cork tiles with ceramic tiles and it worked fine in a bathroom, around a bath. If the current tiles are really well fixed it should be fine.
To properly install new tiling over an existing tile floor, you should first clean and prepare the existing tiles by sanding them and applying a bonding primer. Then, use thin-set mortar to adhere the new tiles to the old ones, making sure to use spacers for even spacing. Finally, grout the tiles and seal them to finish the installation.
Tiles are the ideal alternative for Swimming pools since they give you're an endless selection of color, size and slip resistance. Swimming Pool Tiles can be found in an expansive assortment of shapes, colors, styles, and types. Ceramic pool tile starts a life for a lump of earth everything in that last product is an all-natural material. Viewing outside and over the water, the tiles will provide the floor with a general glossy look. Durability Pool tiles are not just appreciated for the clean and appealing design they give to the pool shell. Looks There are lots of reasons for you to invest in pool tiles, but one of the most essential reasons involves looks. When it has to do with Swimming Pool Tiles, not all tiles are made equal. You'll be happy to know our Spanish pool tiles are environmentally friendly.
Yes, you can typically use peel and stick tile over existing tile as long as the surface is clean, smooth, and free of any loose tiles or grout.
Yes you can install vct over existing vct. The existing vct must be well adhered to the subfloor, no loose tiles or cracked and chipped tiles. If tiles are missing or must be removed you will need to patch in those spots with a suitable portland cement leveler or new pieces of vct. You will need to sand off the wax layer that may be present on the existing vct because if it is left on it can wear loose over time causing adhesion failure of the new vct and glue. Sweep all dust and contaminants from the floor.
I would use one of the Mapei Ecobond adhesives. There is one specifically for this.
Yes, if the flooring is level, uncracked, and has no loose pieces. You will need to strip the surface of the slate to ensure no residue remains that would not allow the mortar to bond.
You can lay tiles again but make sure you buy proper mortar. You can install any kind of floating floor such as laminate, engineering wood, interlocking vinyl tile. Your main concern should be structural integrity of existing floor, if its not falling you can do pretty much anything
nope
The most important aspect is to make sure everyone is Safe. Using an OTLVISE to move the Granite will reduce the working load and allow you to roll it. Clamps as well to lift it with. Many patents with this NEW and Innovative tool
For this you need to carry out two steps: Firstly, call straight talk and check if your existing phone is compatible with it. Then you need to obtain an unlock code from the US Cellular/sprint to switch to straight talk from Verizon. Then when u get the unlock code, ask them to guide you through the procedure of switching.