My grandson had to replace the motor mounts on his Pontiac Grand Prix last year and now the mechanic says they need replaced again. He has hardly driven it. How can that be
it's under the throttle body ,(air intake) on right side(back of the motor)pully and belts is on the leftside(front of motor)1999 grand am 3.4 sfi.
How to reset the computer 1999 pontiac grand prix gt 3800 series II v6?
You will need to take out the whole motor to replace it. It is usually best to get a mechanic to take care of it.
where can you find a diagram of 1994 pontiac grand am motor?
where is the location wiper motor Pontiac grand prix 2002
there are 2 located directly in front
Are you talking about the oil pan reservoir at the bottom of your motor?
front of the motor bottom of the block on my 96
Where is the motor mount located on 1995 grand am
on 2.3l It is on the front of the motor under the intake manifold next to the starter.
no way dif motor monts
The flex plate is bolted to the back of the crankshaft. It connects the motor to the torque converter in the transmission. To replace you remove the transmission and replace it.
yes it should bolt right up as well as the original motor and tranny
its behind the front lower motor mount
To replace the alternator you must tip the motor. by removing the motor mounts in front on the motor.just the two top ones and than roll the motor forward. that will give you enough room to remove the alternator
impossible i did and i had to drop the hole motor out of my car and so yah...
Go to autozone.com and search in repair info.
Banda del motor
were is the crankshaft sensor located on a 1987 Pontiac Grand AM with a 2.5L engine
in the motor
It has 3
Remove the window regulator and motor from the door as an assembly. Drill out rivets that hold motor to regulator and replace motor. Regulator needs to be riveted back into door for reassembly
The blower rheostat on a 93 Pontiac Grand Am is located inside the engine bay, just to the right of the blower fan housing. It is almost directly behind the trans dipstick. It isn't that hard to replace.