0
What else can I help you with?
Where is the idle for a pocketbike?
it is on the bottom of the corroborator and you need to use a flat head screw driver.
How much slope does flat roof need?
1" per 4' minimum.
How do you do a drop-in on a skateboard?
first you need to put the tail of the board on a halfpipe. Then you need to put your back foot on the tail and your front foot where the screws are. Then leen forward puting your front foot down.
How do you drill a five sixteenth inch hole four inch depth flat bottom hole?
5/16 hole X 4 inch on a flat bottom hole: This will depend on the material, and tools available. Use a 1/8 bit, then 5/16. If you are not sure how deep the drill bit is in the hole, paint white out on the bit as your 4 inch mark so you can see it while the drill is spinning. If the material is metal, you will need coolant. To get the flat bottom: it wood, put a flat ended bolt into the hole and hammer, it will flatten the hole, it metal, forget about it, the hole is quite flat, and a pain in the butt to change. :-)
Do you need bottom molars for chewing?
No, but it takes much more time to grind food up without them.
How much gravel do you need?
For a fish tank, you need enough gravel to make a thin layer on the bottom of the aquarium. For an outdoor walkway, you need much more.
Do run flat tires ever need patched?
yes, run flat tires may need patched
Carburetor adjustment kawasaki prairie 400 how do you get to the adjustment needle under the bottom?
You need a flexible flat head screwdriver. It looks like a regular screwdriver except the shaft is a tightly wound spring.
Why do dams need to be thicker on the bottom and thiner at the top?
because the water pressure on the damn is much higher on the bottom of it than the top.
Why are the bottom of your feet red?
the bottom of your feet are turning red because either you have walked on them way to much, stepped in something weird, or you maybe have really sore feet and they need a break.
How do you build a wooden toy chest?
You need to gather your supplies such as wood, hinges, tools you may need, and wood putty. cut bottom, top and side pieces from wood according to the size preference. place the bottom piece flat and then attach the side pieces by screwing them into the bottom and then using wood putty. To attach the top of the chest attach hinges to the top piece and once the sides/bottom are dry (wood putty) attach the top. Paint to desired color and you are done.
Why petrol station in Malaysia roof flat?
Petrol station in Malaysia roof flat because need to stop from burning. If heat can be inside, there will be much danger of possibly. Fire will to destroy many. But if petrol station roof flat then has chance not to inchange spark fire for not to come to life. Flat helps for keep every balance.
