you need to adjust thecarburetor
it will tell how in the owners manual.Also the adjustment for the idle is a gold colored knob that sticks out on the left side of the atv(clutch side),Idle mixture screw is in the middle of the carb under the intake side of the carb(hard to get to)(venturi)side
To set the idle, adjust the carburetor.
the only way i can find to set mine is move the cable out a little.
You set cam timing on a Yamaha big bear 350 4x4, by opening up the bike chassis and looking for the cam timing levers. You can adjust it up or down until you have it set to how you want it.
Manual says align with the first T
This is something that can be difficult to do without the right experience. Make sure to get assistance if needed.
set the idle down on the carb
Check your parking brake, it will do this if your brake is set. Otherwise, check your air filter, change the spark plug, and clean the carburetors one at a time if the problem still persists.does the machine have a throttle override? I know Yamaha has them on many models. it was meant to retard the engine if the throttle sticks, or by the sounds of it, if the parking brake is left on.
Best Yamaha acoustic drum set - Yamaha Phoenix Best Yamaha electronic drum set - Yamaha DTX950K
how to set Yamaha pw80 carburetor
Idle is set by the computer.
Does it idle high all the time or just for a bit after you start it? There are a couple things you could check such as: 1- Defective throttle cable 2- Idle srew on you carburator is set too high 3- Choke is on Good Luck!
Idle is automatically set by the computer with the use of an idle motor.