Go to the trunk of the car.
remove the cover for the spare tire section.
then find the large block knobs along the trim panel along the lower edge of the trunk. remove those and then lift up and remove the trim panel.
go to whichever side you need to replace.
look for more of those black knobs and unscrew them along the side you need.
then pull back the gray felt panel.
this will give you access to the tail lights.
there are two small bolts that you need to remove on on the back of the housing.
take them off and then you can tug on the taillight assembly and it will come off.
unscrew the bulb housing and replace the bulb (usually a 3157 (3175 maybe?) size)
go in reverse order to put everything back together.
-Kaeghl@Yahoo.com
How do you remove cover to replace brake light on 57 kia Rio
To replace the tailight out of a 1998 Cadillac Deville just remove the fuse and place a new one in the light\'s bulb.
To replace the dome light in your 2005 Toyota, you will need a flat screwdriver to remove the screws and pry the dome light cover from the light. You can then access the light to change the bulb or replace the entire bulb and cover.
Inside the trunk remove the fasteners that hold carpet on backside of lamp's. Then you can unscrew the caps that hold the light. Remove from car and replace the bad bulbs. Its really not hard at all.
Remove the connector from the back of your 2003 Cadillac parking light assembly. Take hold of the lightbulb, push in and turn at the same time to remove it. Reverse the process to install the new parking lightbulb.
By popping the light cover off and then figure out in your owners manuel how to remove the the bulb.
lightbulb in shifter is blown. remove shifter cover to replace bulb
You first have to purchase the correct light bulb for your Peugeot 207. The next step is to remove the bolt that is holding the light bulb cover in place. Then, remove the light bulb cover. finally, replace the bulb.
Remove the dome light cover. The cover can be removed by prying outward on the retaining clips. Take hold of the lightbulb, push in and turn at the same time to remove.
Remove the dome light cover. The cover can be removed by prying outward on the retaining clips. Take hold of the lightbulb, push in and turn at the same time to remove.
you remove plastic red/white cover with 2 screws and remove bulbs.
Remove the head light cover plate, then remove head light braket, once you have done that pull the light out and un-plug it.