Want this question answered?
To make a Beyblade tip is easy, but you will need an existing tip to make a new one. You will need an L-Drago tip or a Thermal Liserta tip. 1) Cut off the bottom part of the tip. 2) Take a launcher and unscrew the screw from it. 3) Use the screw driver to make the hole bigger, and screw on the screw. You now have a stamina/attack tip.
put a 1cm screw in the performance tip
You can sharpen the tip of your Beyblade by lightly sanding it with fine sandpaper or using a sharpening tool designed for Beyblade tips. Be careful not to remove too much material, as this can affect the performance of the Beyblade. Regular maintenance of the tip can help keep it sharp.
SD (Semi defense)
take off the broken botton and put an eraser from a pencil resize it if needed
Yes, it has the quake performance tip, and that has a slit in it.
try bearing oil or skate wax and then sharpen the tip
you have to switch the tip with a beyblade that has alot of stamina on its tip i would probbaly switch the tip with dark wolf becaus when i switch the two tips it spins faster and longer hope this helped you!
To assemble a Beyblade, locate the base, the energy layer, the forge disc, and the performance tip. Slide the energy layer into the base, attach the forge disc on top of the energy layer, and finally, place the performance tip at the bottom of the base. Make sure all parts are securely in place before launching the Beyblade.
The SF performance tip was first introduced with the beyblade Flame Sagittario C145S. It features a sharp flat tip that provides aggressive movement and good stability during battles.
To prevent the tip of Blitz Unicorno from retracting during battles, you can try tightening the screw on the bottom of the Beyblade. This will provide more stability and keep the tip in place when struck or in motion. Additionally, you can also use tape or rubber bands around the bottom of the Beyblade to hold the tip in position.
you don't. ;) MY OPINION====== I've never heard of an answer posting troll, until now, but you can cut a piece of paper, fit a solid underneath as a tip and make sure it fills up to the middle,place a metal fusion wheel in there, and sellotape it all together.