Do not know exactly, but most exhausts are simple. Find where it connects on either side. Undo the bolts, and tubes connecting to it. All bolts taken off, put in a ziplock bag and mark it so you know which bolts go where. Tubes, put like a piece of Duct Tape or painters tape around it, and write where it goes with a sharpie.
then put the new exhaust in, install the screws, install the tubes, fire it up and see what happens
bolt on parts such as high compression head, bigger carbie, and a good power pipe!!
No it won't only 1999-2002
I have an after market FMF pipe and silencer on mine.
on a hoist
it is just a breather pipe
No. Australian pipe threads are metric and the US is not.
the 2010 250 does about stock 135, 145 with a pipe easy
The pipe usually goes under the slab.
You need at least a 3 in. pipe -- shower is 2 in. pipe
It's located under the car on the exhaust pipe,probably has carbon build up on it. You can buy an o2 sensor tool from auto parts store
Call a pumer
I would install studs, or struts, on each side of the pipe in question.