0
Undo wheel nuts, slacken chain tensioner(if applicable). Push wheel forward in the dropouts. This should give enough slack to unhook the chain. If you want the chain completely off you probably need a chain breaker tool. Some bikes are fitted with quick links/master links that can be opened w/o tools. Just look for a link that's different from the others.
What else can I help you with?
Is a Next Intruder a BMX Bike?
Yes
Where can you get a sprocket for a next intruder bike?
jcs or any bike store
How do you use a bike chain tool to properly repair or replace a bike chain?
To repair or replace a bike chain using a bike chain tool, first, remove the broken or old chain from the bike. Then, use the chain tool to push out the pin holding the links together. Next, align the new chain with the gears and use the tool to push the pin back in to connect the links. Finally, check that the chain is properly aligned and tensioned before riding.
How can I fix a bike chain?
To fix a bike chain, first, determine if it needs cleaning or lubrication. If it's rusty or dirty, clean it with a degreaser and a brush. Next, check for any kinks or twisted links. Use a chain tool to remove the damaged link and reattach the chain. Finally, lubricate the chain with bike-specific lubricant.
How can I install a bike chain properly?
To install a bike chain properly, first, make sure the chain is the correct length for your bike. Next, thread the chain through the rear derailleur and around the cassette. Then, connect the ends of the chain using a chain tool or quick link. Finally, adjust the tension of the chain by moving the rear wheel back in the dropouts until the chain is tight but not too tight.
How can I fix bike chain skipping?
To fix bike chain skipping, first check if the chain is worn or dirty. If so, clean and lubricate it. Next, adjust the tension of the chain and make sure it is properly aligned with the gears. If the problem persists, consider replacing the chain or cassette.
How to put on a bike chain properly?
To put on a bike chain properly, first, make sure the chain is the correct length for your bike. Then, thread the chain through the rear derailleur and around the rear cassette. Next, loop the chain over the front chainring and connect the ends using a chain tool or quick link. Finally, adjust the tension of the chain and test the gears to ensure smooth shifting.
How do you use a bicycle chain tool to repair or replace a bike chain?
To repair or replace a bike chain using a bicycle chain tool, first, remove the broken or old chain from the bike. Then, place the chain on the tool's slot and turn the handle to push out the pin holding the links together. Next, align the new chain with the tool and push the pin back in to connect the links. Finally, check the chain for proper tension and make any necessary adjustments before reattaching it to the bike.
How can I ensure that the bike chain I am fitting is properly aligned and securely attached to the gears and pedals?
To ensure the bike chain is properly aligned and securely attached, first, make sure the chain is the correct length for your bike. Next, align the chain with the gears and pedals by placing it on the sprockets and chainrings. Use a chain tool to connect the ends of the chain securely. Finally, test the chain by pedaling to ensure it runs smoothly and does not slip off.
How do you take gears off a bike?
To remove gears from a bike, you will need to first shift the chain onto the smallest chainring and smallest cog. Then, use a chain tool to break the chain and remove it from the bike. Next, use a wrench to loosen the bolts holding the gears in place and carefully remove them from the bike. Make sure to keep track of any washers or spacers that may be present.
How do you put a chain on a bike with gears?
To put a chain on a bike with gears, first shift the gears to the smallest chainring and smallest cog. Then, loop the chain around the chainring and the cog, making sure it is properly aligned. Next, thread the chain through the derailleur and connect the ends using the master link or chain tool. Finally, test the chain by pedaling to ensure it runs smoothly through the gears.
How can I install a new bike chain on my bicycle?
To install a new bike chain on your bicycle, first, shift the chain onto the smallest chainring and smallest rear cog. Then, remove the old chain by breaking the chain using a chain tool. Next, thread the new chain through the derailleur and around the chainrings and rear cassette. Use the chain tool to connect the ends of the chain, making sure it is the correct length. Finally, test the chain by shifting through the gears to ensure it runs smoothly.
