Replace it.
First off where is it? If it is in line then you can cut that section off and replace it with rubber fuel line of equal size.
You sit on it, and you press the gas. Then you turn the stearing bar and the snowmobile will turn.
Replace it
In the rubber part of what?
cut the fuel line then drain it then splice the fule line back on
cut the gas line at the leak put a piece of rubber gas line over the steel line and clamp it at both end this clear gas line is available at more automotive stores cominly used for gas line on lawn mowers
do it up!, or just cut the gas line on the 400
It sounds like the track slips because a snowmobile makes like a rrrrrrrrrrrrrrrrrrrr sound
under the gas tank inside of the car but you have to cut your gas line. and then repair it
Replace the line, don't screw around with cheap fixes it ain't worth burning your car to the ground.
To purge a gas line go to the gas line at the appliance. Turn the gas cook(cut off) to the off position(perpendicular to the gas line). loosen the gas line on appliance side of gas cook (this is done at a flare fitting or union). Next turn the gas cook back on until you smell gas.Turn gas back off and re-tighten gas line. Turn gas back on and check for leaks(50/50 water and dish soap sprayed onto fittings). No bubbles means no leaks.
fouled plug(s) or carburetor icing