0
Mathews SoloCam bows have 10 pound weight reduction range from your Bow's peak weight (example : if your bow has peak weight of 70 pounds, you can adjust it as low as 60 pounds).Draw weight adjustments are made using either a 3/16" or 7/32" Allen wrench. Turn the limb bolt clockwise to increase the draw weight and counterclockwise to decrease the weight. Each rotation is equivalent to 2 to 4 pounds of draw weight. It is very important to adjust the limb bolts equally but do not exceed 5 full turns out from maximum draw weight.
What else can I help you with?
Does the Fred bear badge youth bow need a bow press to change draw weight?
it has a weight lock on it to adjust the poundage you must unscrew the lock then tighten with the desired alan wrench
What bows can you adjust the draw length without a bow press?
****Answers**** Every bow you should be able to adjust that.
What is the legal bow draw weight to hunt deer in SC?
http://www.dnr.sc.gov/regs/pdf/huntingregs.pdf No restrictions on draw weight in SC.
Is it hard to cock an 80lb crossbow?
80 pounds is a very low draw weight for a crossbow and a very high draw weight for a standard bow
Will leaving a recurve bow strung lower its draw weight?
yes. it weakens the limbs and reduces draw weight. best to unstring the bow while in storage.
How do you adjust draw weight on a Hoyt Raptor compound?
The draw weight is adjusted by tightening or loosining the screws that hold the limbs in their pockets attached to the riser.
How do you adjust the draw weight for a jennings forked lightining compound bow?
The draw weight should be marked on the bow. You cannot go any higher than the marked draw weight unless your bow has removable limbs, then you could buy limbs with a higher draw weight. You will ruin the bow if you use it with a higher draw rate.
How do you draw a eagle?
just draw.
What are limb bolts on a bow?
Limb bolts are small components on a compound bow that are used to adjust the amount of draw weight. By tightening or loosening the limb bolts, the tension in the limbs is altered, which in turn changes the draw weight of the bow.
How do you Draw an Eagle?
A head and a beak
Does the Fred bear badge youth bow need a bow press to change draw weight?
it has a weight lock on it to adjust the poundage you must unscrew the lock then tighten with the desired alan wrench
How strong is 30'' draw weight?
30" is not a draw weight, it is a draw length. It is the length of the draw from the bow to the string when the bow is drawn.
How do you draw a golden fleece?
just draw gold-haired winged ram.
What does draw weight mean when referring to bows?
Draw weight is the power the arrow is loosed at. Bows with more draw weight like long bows require very strong people to handle. The better the draw weight the further/harder the arrow flies eg: Arrows peircing chainmail... Hope this was the answere you were looking for. Enjoy...
What bows can you adjust the draw length without a bow press?
****Answers**** Every bow you should be able to adjust that.
Instructions on draw length of a browning bow?
I have a 1989 Browning Accelerator Plus and I was wanting to adjust the draw length?
What is the draw weight of a anchery bow?
"Draw weight" is a measure of the strength required to draw a bow as well as the force it imparts on the arrows it shoots. It is usually measured in pounds.
