Stx lacrosse heads DO fit on brine shafts.
Heads are usually universal. You may have to drill a new hole in the shaft though.
Yes. In fact, any head can go on any shaft.
any mens head can fit on any mens shaft. i put warrior, brine and gait heads on STX and harrow shafts all the time. the only thing that is different between different brands is where the screw hole is located but alot of people just tape their heads on their shafts anyway. i however are one of those people who like to screw their heads on their shafts but i have found that i can drill a new hole myself by using a 1/8 drill bit. it makes the perfect sized hole for the screw. please add me to your saved sellers on ebay, ihave awesome deals on the top lacrosse gear
a warrior head can fit on any shaft it might be a bit loose though and you might have to drill a new hole.
it will fit on shafts make sure the shaft is mens and it's a little harder to put on a crank shaft. if this is a real problem take it to the nearest lacrosse store and ask them why and if i burned out of shape go to where you bought it and see if you have a warranty (most heads do)
No reebok does not fit with other shafts without adapter and some just dont fit
I am pretty sure it does because brine heads fit on warrior shafts, so they should be the same size
the brine clutch head will fit on any brine lacrosse shafts. I have the Clutch on my brine swizzebeat. i recommended this shaft its is light gripy and cheap. it is only 80 dollars
All maverick shafts and all stx shafts except the bad ones like the alloy n it does fit on brine shafts but u will probably need to drill a new hole. Hope that helped.
any head will fit on any shaft. It just might take a little elbow grease
there are some gait ones that fit
yes they do. i personally have a stiffi on a vanadium and it fits just fine.. you may need to put a piece or two of tape around the shaft under the head if its a little too small
ANY BRINE SHAFT AND SOME WARRIORS (EX) WARRIOR DIAMOND
Any head will fit on a warrior lax head because all shafts are the same.
Any head will fit on any shaft. But if you but a head on a shaft that is a different brand than the shaft, you may need to drill a new hole into the shaft. The only exceptions are the STX Crankshaft shafts which need certain heads.
Yes. Most head wil fit on shafts made by the same company
Any head can be put on any shaft. All you have to do is put the bottom of the head in warm not boiling water, just warm tap water for a few minutes and it should slide rite on to your maverick shaft if it doesn't already.
Yes, all heads fit on all shafts, unless you have a Gait with a 10 degree offset head in which case only the TOS heads work on those
the stx G22 10 degree, K18 10 degree, Kannon 10 degree and the X3 10 degree heads
yes, all shafts fit with all heads except for ones like the katana that are bent or the crankshafts
any type of head except for a crank shaft head because it is bent. But any kind of head should fit.
No they fit all standard shafts.