Yes, but the car must be running for it to work.
Begin by removing the wiring harness from your third brake light. Remove the third brake light retaining screws. Reverse the process to install your new third brake light.
brake light and battery light is on
Where is the brake light switch for 2003 hd Chevy truck As far as I know, all brake switches are on the top of the brake pedal arm.
Just unscrew the two screws holding in the red third tail light. Pull out assembly, replace bulb. 2003 Town & Country used a 921 bulb.
possibly have a brake light out
You need brake fluid
2003 Dodge Intrepid center high mount stop (third 3rd brake light) light bulb lamp replacement: Purchase the correct replacement center high mount stop (third 3rd brake light) bulb(s) first, before disassembling the vehicle. See sources and related links below for replacement bulb information. Then consult your owner's manual for the center high mount stop (third 3rd brake light) bulb replacement procedure. As simple as it sounds, the owner's manual is the best place to start for bulb replacement instructions and illustrations. If there are multiple bulbs, you may want to consider replacing all at the same time in order to keep brightness and color equal (optional).
It is on a bracket next to the brake pedal.
The brake light switch is above the pedal.
replace the relay under the hood Also check brake lights switch had the same problem switched bulbs and worked fine
There is no brake fuse on the 2003 Venture. there is a EBCM/EBTCM. This module controls the ABS in your vehicle.
all brake light switches are connected to the brake pedal --- any car or truck or van