Yes you could saw off the blade of a one piece stick and then go to a store and put on a new blade
It depends on the quality of the swim suits. For two pieces, you can have a more variety of colors to choose from and you can mix and match, while for one piece, you would have to stick with one color.
each piece would weigh one quarter of a pound
a bain and the unbendable stick with one shaped piece of metal plate
Two minus one = one
you stick one in and then you stick another one in
all u need to do is put two y shaped sticks in a piece of foam. then put a smaller stick on top and tie it two the y shaped sticks. put a long stick on the smaller stick and tie that together. now put a lump of clay on one end of the long stick, and tie a bucket on the other. now you have a shaduf. enjoy!
all u need to do is put two y shaped sticks in a piece of foam. then put a smaller stick on top and tie it two the y shaped sticks. put a long stick on the smaller stick and tie that together. now put a lump of clay on one end of the long stick, and tie a bucket on the other. now you have a shaduf. enjoy!
Put all three wires from the one switch under one terminal.
The switch is located under the dash by the steering column and brake pedal. You have to remove a cloth like cover on the drivers side under the dash. The switch is a plastic piece with two connectors attached to it. One has 4 wires the other has 2.
one fifth is 3.2m. so one three-fifths piece is 9.6m and the two-fifths piece is 5.4m
You need two separate switches. You can get two switches that are in the same form factor as a single switch (2 gang switch). You use one switch for the outlet and the other for the light. You switch the black wires which are "hot".
two vs two fights or one vs two and one switch with partner