how to remove rear axle from 1988 f250 ford
The O2 sensor on a 1988 F250 is not near the engine. Go to the exhaust manifold and down the length. It is near the catalytic converter.
what is the timing set's for a 1988 ford F-250
should be a C-6
1985-1988 ford f150 f250 and f350 or a 1994 f150 f250 and f350
F250 FIRING ORDER 6 CYLINDER 1... 5... 3...6 ...2 ...4.
Distributor rotates counterclockwise. Firing order: 1-5-4-2-6-3-7-8
16x6 steel rim
What is your problem? Be more specific
Where can I find a free starter solenoid replacement diagram for 1988 ford f250
Answer1,3,7,2,6,5,4,8 is the firing order. The cylinders are numbered 1-4 from front to rear on the passenger's side and 5-8 from front to rear on the driver's side. THIS IS WRONG. THE CORRECT ORDER IS 1,5,4,2,6,3,7,8, COUNTERCLOCKWISE ROTATION. FIRING ORDER IS ALSO LOCATED ON THE INTAKE MANIFOLD, AT LEAST IT IS ON MY 97 F250 HD 7.5, THE OIL COMPANIES JUST LOVE US.
You fill the transmission fluid on the 1988 F250 diesel at the dipstick of the transmission. You will need a filler funnel in order to keep spillage to a minimum.
on the bottom of the throttle body
Probably a bad relay.
1 - 3 - 7 - 2 - 6 - 5 - 4 - 8 The distributor rotor turns COUNTERCLOCKWISE The marked # 1 position on the distributor cap faces to the REAR and slightly towards the drivers side
1988 Ford F250 front tank is 19 gallons and rear is 18.2.
1 - 5 - 3 - 6 - 2 - 4 The distributor rotor turns CLOCKWISE
On the Gas petal inside the vechile.
Front axle is a TTB Dana 50 Rear is a 10.25" full floater
I'm not sure what it would be if it is a gas engine, but if its a diesel, its probably 1-5-3-6-2-4
5.8 not sure but could be the same as a5.4 which goes as follows1-3-7-2-6-5=4=8 with number 1 being on the right bank or passenger side
Where do you find the chassis number on a 1999 Ford F250 truck