answersLogoWhite

0

Lexus ES

The Lexus ES series is a line of middle-sized luxury sedans manufactured by Lexus from 1989 to present. The series is patterned on the Toyota Camry platform and features an automatic transmission, V6 engine and front-wheel drive.

500 Questions

How do you install a starter for a 1998 Lexus ES300?

User Avatar

Asked by Wiki User

first start by removeing the battery and air cleaner assembly and the you will have access to the starter. then remove the 2 14m bolts that hold in the starter and remove and replaced reinstall all parts and your done.

Who manufacture Toyota?

User Avatar

Asked by Wiki User

Toyota Motors, of course.

300 how to change tail light on Lexus Es?

User Avatar

Asked by Wiki User

On that car it is called a transmission range sensor and it attaches transmission gear selector cable to transmission. Just remove and install new part in reverse order (if that is the problem).

How much does it Cost to replace a car starter?

User Avatar

Asked by Wiki User

Depends on cost of a new starter, and no more than an hours worth of labor. So 50 plus the cost of the starter. Call any auto store to get a rough idea on the cost of it.

How do you reset the radio code on 94 Lexus LS400?

User Avatar

Asked by Wiki User

If your radio is displaying "Loc" and you cannot remember or know the 4 didget code to unlock it, you can take it to a local Chevy dealer and they should be able to unlock it for a small price as this happened to me.

Who has the most power?

User Avatar

Asked by Wiki User

Your question is unclear do you mean now or back then and military power? well ever since the 1800's the United states military power is and has been unmatched. They have the most weapons in quantity and in advanced technologie

How many cars are there in the US?

User Avatar

Asked by Linamrozo

There are about 250 million highway registered vehicles in the USA, not including motor cycles. There are about 800 million heavy and light vehicles on the roads worldwide today.

Who makes Lexus?

User Avatar

Asked by Wiki User

Lexus is a division of Toyota

How many miles do you have to drive to reset for an emission test on a 1997 Lexus Es300?

User Avatar

Asked by Wiki User

150 you would be safe, could be as little as 75

Why would a Lexus power window go up but come down about half way and wont stay up?

User Avatar

Asked by Wiki User

THAT MEANS THAT THE WINDOW IS NOT INITALIZED AND TO DO THAT YOU NEED HOLD THE WINDOW SWITCH ALL THE WAY UP AND HOLD IT THERE FOR A FEW SECONDS THEN PUT THE WINDOW DOWN AND HOLD THE SWITCH DOWN FOR A COUPLE SECONDS AND THEN IT SHOULD BE OK

How do you turn inside brake warning light off or reset it on a Lexus ES300?

User Avatar

Asked by Wiki User

you are either low on brake fluid, the Ebrake switch is on or you have air in your brake lines. try lifting the ebrake and see if the light gets brighter. If it does, try unpluging the wire that goes to the brake master cylinder. If this don't work then i recomend taking it to a shop to have it looked at! Good Luck... Michael

on my 97 es300 the brake light was staying on because ebrake inside of back rotor was worn all the way down and system was sensing this.

Noise coming from trunk not speakers?

User Avatar

Asked by Wiki User

check the spare tire to see if it is tightly in place it is your power ant trying to raise or lower check that

What would cause the 'rear light failure warning' light to stay on in a 1996 Lexus ES300 even though no bulbs are burned out?

User Avatar

Asked by Wiki User

It may caused by a light installed that don't match the factory specifications, could be the wattage is a bit off or something of that nature. It could also be the lamp failure sensor. On the LS400 it is located in the trunk on the drivers-side just behind the backseat. The sensor activates the warning light when there is a break in the circuit for the brake lights or the tail-lights.

What is the drag coefficient of the 2014 Lexus ES-350?

User Avatar

Asked by Wiki User

The 2014 Lexus ES-350 has a drag coefficient of 0.27 Cd.

How do you remove front lamp assembly on a Lexus ES300-98 to replace turn signal bulb?

User Avatar

Asked by Wiki User

I have a Lexus 300 and, surprisingly, I have found the parts department of the dealer to be very helpful when I wanted to make minor repairs. I just called and they told me how. It's certainly worth a try. Good luck.

Removing front lamp assembly and correcting a fast flashing blinker. (This is the procedure for a '96 ES300. I would assume that other models are basically the same.)

1. Open the hood and remove the plastic clips that hold the front plastic splash guard in place. This is done by pushing on the center of the plastic buttons to depress them slightly. The button (clip) can then be removed. For the buttons (clips) with the Philips head center, lift the Philips head center until you hear a click and then remove the whole clip.

2. Remove the plastic splash guard.

3. Remove the three 10mm bolts that hold the lens assembly to the fender.

4. On the fender side of the lamp assembly there is a plastic clip that is inserted in a small flange which is part of the fender. Use a flat screwdriver to put pressure on the back of the post that protrudes thru this clip. This post, that is part of the lamp assembly, helps to hold the assemble in the correct position. Once that post is free of the clip the lens assembly can easily be removed.

5. Un-clip the wires to the main headlights and the the parking/turn signal lamp and remove the lens assembly from the vehicle.

6. In the case of a fast blinking turn signal, remove the turn signal bulb, test to be sure it is good, and clean the contacts of the blub, bulb holder, and the printed circuit strip on the lamp assembly.

7, Reassemble everything and test.

8. Replace the lamp assemble in the fender and secure the splash guard with the clips.

9. This should be about a 1/2 hour job.

I am a car repair newbie and I was able to do this repair following the above instructions in about 2-3 hours. It probably saved me $100 in labor and a pair of turn signal bulbs were under $6 with tax, so you should definitely do this one yourself and not get lazy and take it to a shop. Here are some extra tips:

1. There are 2 bolts, 10 mm and 12 mm, by the windshield washer fluid reservoir that are pretty difficult to get at. Don't waste your time with them because they won't help you get the lamp assembly off.

2. The splash guard is the long thin plastic thing that goes across the entire front end of the vehicle (not just the side you want to get at). It has about 15 clips going across it and you should remove it entirely to avoid bending it or it getting in your way.

3. The only tool you really need to do this job is a ratchet with a 10mm hex end. You need something long and thin to push on the end of the clip described in step 4, which is right by the turn signal bulb, by the way. You might also need a Phillips head screwdriver to loosen the clips on the splash guard. Other than these tools, if you find yourself reaching for other tools you are probably removing something you don't have to.

4. The lamp assembly has 3 wiring harnesses going to it, one for each bulb in the lamp assembly.

5. You don't need to disassemble the lamp assembly at all. Don't remove the clips and Phillips head screws. All you need to do is grab a grey plastic holder and twist to get the turn signal bulb out. It is probably similar to get at the headlights to replace them, although I didn't actually try that. The headlights have a few small Phillips head screws around them.

6. Unless you are a pro at a shop you probably don't have any way of testing the bulb outside of the lamp assembly. Just replace it even if the bulb looks fine (mine didn't show any visible signs of being burned out, but it was fast blinking anyway), they are only $6 a pair, and it would take you more than that worth of your free time to remove the lamp assembly again if the bulb started fast blinking again.

7. The turn signal bulb is an amber color and the part number is 1157NA, in case you are trying to find if your parts store has the right one.

8. My experience was also on a 1996 Lexus ES300. The original question asked about a 98, and they redesigned this car in 97, so these instructions might vary for newer models.

FOR 99' ES300 MODELS: You do not have to do the things mentioned above. The process is much easier and simpler. No need to even open the hood. All you have to do is pull the whole turn signal assembly forward. NOTE: It is important that you do NOT pull it sideways or even at an angle for it might break the plastic clip. There is only one clip holding the assembly from the frame. To start, use a screw driver or similar and insert it in the farthest part of the signal light assembly from the front. Pry gently to move the assembly forward about an inch or two to completely unlatch the plastic clip that is holding it in place. This clip is located in the middle of the assembly. Then remove the assembly still attached by the wires. Twist the lamp holder out of it's socket to replace the busted light.

How do you fix 1994 Lexus es300 that stalls?

User Avatar

Asked by Wiki User

You may need a new Random Misfire Solenoid P1300!

What is 300 times 301?

User Avatar

Asked by Wiki User

300 * 301 = 90,300

How do you repair a Front driver side window on a Lexus 300 es that has fallen off the track?

User Avatar

Asked by Wiki User

Go to the junk yard and and buy the window with the plastic guide attached to it for about $70. Otherwise, it will cost you about $430 at the dealership and about $175 at some glass vednor plus another $100 for installation.

What is the turning circle of the 2012 Lexus ES-350?

User Avatar

Asked by Wiki User

The 2012 Lexus ES-350's turning circle is 36.7 ft..