0
It depends as there are many ways to draw a bow. There are three main answers, 2 fingered, 3 fingered, and then with a mechanical release. [I use three fingers, but every person is different].
Wiki User
∙ 15y ago
Wiki User
∙ 11y agoAll
Add your answer:
Earn +20 pts
A stick used in playing most of the string instruments?
there are actually many, there's the pick, the bow, your fingers and probaply many more.
What can you do with a violin Pluck it and?
Bow it, meaning to draw a bow across the strings.
What is the anchor in archery?
When you draw back the bow you anchor your fingers that are holding the string and arrow to your cheek or corner of your lip. So the anchor would be a part of your face, usually the corner of lip.
How hard is it to draw back a 50 pound compound bow?
The initial phase of drawing is hard until the let off phase of the bow comes into operation making it easier. When the bow is at full draw the holding weight will be much less than the weight delivered to the arrow. The gain in mechanical advantage when drawin and holding the bow is due to the pulleys or cams used in the bow.
Which hand controls the bow with a violin?
The Bow hand, the other is called the draw hand.
A bow finger should be protected by a peace of leather or a glove what is the leather called?
The piece of leather or glove that protects the bow finger is called an Archer tab. These tabs are used in archery to protect the archer's fingers from the bow draw.
A stick used in playing most of the string instruments?
there are actually many, there's the pick, the bow, your fingers and probaply many more.
How do you figure out how many pounds of pressure are in a bow of a bow?
You can measure how many pounds it takes to draw the bow by putting a scale on the string at the nock point.
How many fps does draw length increase your bow?
The general rule of thumb is that one inch of draw length will increase your speed by approximately 10 fps. This will vary from bow to bow and depends a lot on the draw length and poundage being changed.
How strong is 30'' draw weight?
30" is not a draw weight, it is a draw length. It is the length of the draw from the bow to the string when the bow is drawn.
What major muscles are used in the arm and forearm to draw a bow?
Biceps and forearm muscles are used
How do you play the double bass?
you pluck it with your fingers or bow it with a bow.
When did finger boards come out?
if your refering to giveing the fingers as in the two fingers in gusture to tell some one to F Off, it can from the medievil ages i think from bow men from the English used to get their fingers cut off, if captured and the oposition used to give the fingers to the bow men to symbolise that thay have their to fringers and your going to get your finger cut off.
You bought a used bow the draw length is 30 but you are a 27 can the bow be adjusted for 27?
If it is a compound bow, the type of bow with the pulleys or "wheels" at the ends of the bowlimbs, there should be some way to adjust the draw-length of the bow itself; it may be best to consult someone at an archery shop for the best way to make such an adjustment. When using a Traditional bow -- a recurve or longbow, or other non-compound type -- the only "adjustment" is to simply pull the string back (in this case) to 27 inches; reducing the draw-length in this way also reduces the effective draw-weight of the bow. Also, when using a Traditional bow, and the archer has a longer draw-length than the bow is rated for (i.e., the archer's draw-length is 30 inches, but the bow is rated at 27 inches), it is always advisable to make sure the bow is designed to withstand the longer draw-length. Failure to do so can result in the catastrophic failure of the bow, and possibly serious injury to the archer. Increasing the draw-length of a traditional bow will also increase the effective draw-weight of the bow.
What are bow compasses used for?
Bow compasses are used to draw multiple circles consistently the w/ the same radius. You can use the spring to adjust the size of the circle.
Why do people have trigger fingers while shooting bow and arrow?
It depends on the bow, some people use this method so it does not cut their fingers (bow string) this is important for a compound. But the main reason is that it stops the archer from cutting her/his fingers
How do you adjust the draw weight for a jennings forked lightining compound bow?
The draw weight should be marked on the bow. You cannot go any higher than the marked draw weight unless your bow has removable limbs, then you could buy limbs with a higher draw weight. You will ruin the bow if you use it with a higher draw rate.
