to measure distance
a metre is a Greek word for measurement.
1 metre also = 100 cm
A metre rule is a ruler that is 1 meter in length. In the US it's also called a meter stick.
It is use to measure distance
A meter rule.
What's the function of meter rule
0.5mm
If the calibration starts from the edge of the stick then it is a meter rule Basically "0" starting from the edge And if it is a meter ruler ,there is like half inch of empty space before 0
0.5
Measuring anything up to a metre (meter in USA); drawing straight lines. Rule is the "proper" word for what most of us call a ruler.
Two methods: 1. mark a point on the circumference of the round object; put a mark on the floor; line up the marks and roll the object along the floor until the mark retouches the floor; use the meter rule to find the distance between the marks on the floor. 2. measure the diameter of the round object using the meter rule and multiply it by π (pi ≈ 3.14159)
1 place the scale in contact with the object along its length starting from 0. if the zero mark is not clear use any other full mark of the scale. 2 your eye must be exactly in front of the point where the measurement is to be taken.
I would use a measuring tape because it is easier to wrap it around a baby's head.
-- analog ohm-meter -- analog power meter -- analog audio level meter -- slide-rule multiplication/division scales -- slide-rule tangent/cotangent scales -- analog tuning dial on an AM radio
1989
A metre rule.