i have a Winn type of grip and it works great
Grip: It depends what grip you are using Head: about 45in.
Golf grip tape is currently a generic product. There are many manufacturers of double sided sided tape. It is simply a way of attaching a golf grip to a golf club.
shaft my hubby says its a grip
it is a taylor made golf shaft that has a smaller dia at the bottom of the grip .
Yes, white spirit is very good to use when regripping a golf club. It is in my opinion, the next best alternative if you don't have grip solvent.
There are three main parts, the head, the shaft and the grip.
You need new grip tape.
You put the club in a rubber vice and tighten. Then get a Stanley knife with a hooked blade, put it at the bottom of the grip and pull the knife towards the butt end of the club. You then use some grip solvent or white spirit to remove the old grip tape. And then you can start putting on your new grip.
You get shaft entensions and cut them to size. Then you take the grip and grip tape off the club. They fit into the current shaft and must be glued in place as shaft extensions must be permanent. You then reprip the club
Golf grip solvent is lighter fluid/shellite.
the club will not be up to its normal height (obviously) but the club should be OK as long as the shaft hasn't split when it snapped