0
The height of a regulation dartboard is 5'8" from the center of the bullseye to the floor, with a toe line at 7' 9.5" inches from the front of the board for steel tip darts.
Curtis Strite
Wiki User
∙ 16y agoThe height of a regulation dartboard is 5'8" from the center of the bullseye to the floor, with a toe line at 7' 9.5".
Wiki User
∙ 16y agoThe dart board should be mounted so the center of the board is 68 inches high.
Anonymous
65
Add your answer:
Earn +20 pts
Regulation dart board height?
The common US distance from throw line to face of board for soft tip darts is 8 feet. 7'-9.25 inches is for steel tip darts.
How do you hang a dart board in a cabinet?
First you need to buy or build a dart board cabinet. When you hang the dart board cabinet you want to make sure that when you put the dart board inside the bullseye is 5' 8" high.
What is the height of a basketball post?
The regulation height for a NBA and NCAA basketball hoop is 10 feet.
What is the Height of a Dart Board if your Widdy board says 5 ft 3 inches?
A dartboard manufactured by Widdy is an American style board, usually found around Philadelphia and that region. This is opposed to an English style board.An American board has both the double and triple scoring rings on the outside. It also has thin inlaid steel wires separating the sections. This differs from the English board that most people know, which has the double ring on the outside, and the triple ring halfway between the cork and outer ring. For an English style board, the official measure is "center of the bullseye is 5 feet 8 inches from the ground." However, for American style boards like your Widdy, 5'3" is the correct height. See this blowup:http://www.americanstyledarts.com/widdyDistanceBlowup.htmlthe height has the same measurements as the width.
What is the height of bullseye to the floor of a standard dart board in feet and inches?
5'8" from the floor to the CENTER of the BULLSEYE is the height. 7'9.25" from the FACE of the board is the throw line.
Regulation dart board height?
The common US distance from throw line to face of board for soft tip darts is 8 feet. 7'-9.25 inches is for steel tip darts.
What is the professional height of a dart board to center?
7 feet, 9 1/4 inches
If a dart hits another dart and not the board what is the score?
For a score to count, the tip of the dart must be touching the dart board.
How do you hang a dart board in a cabinet?
First you need to buy or build a dart board cabinet. When you hang the dart board cabinet you want to make sure that when you put the dart board inside the bullseye is 5' 8" high.
What can one do with a magnetic dart board?
Its a portable version for dart board catagories, There are some differnt dart board catagories and below i just try to give which one you can choose Sisal Dart board = Professinal Level Electronic Dart board = For multi play option with professinal level Magnetic Dart board = Only for children and just for practice and fun Here you found more resouce about dart board.
What is the best dart board to buy?
the best every day dart board is a "sportscraft" one
What are dart points?
Dart points are made of steel, they help the dart stick in the board.
What number is opposite 10 on a dart board?
14 is the number that is opposite the number 10 on a dart board.
Which number lies between 7 and 8 on a dart board?
Between 7 and 8 on a dart board is 16.
Why will a dart stick in a dat board but not a penny will not?
A dart board can have darts attach to it through a variety of ways, but usually this is done through magnets or the dart puncturing the board. If you dug the penny into a dart board that is supposed to be punctured, it might stick in there, but on a magnetic board, you would not have much luck since pennies are not made of a ferrous metal.
How do you do bullseye in insectonater zombie mode?
Play Selectioner until you get the dart board background , and then use your darts and throw a dart at the red circle in the very center of the dart board.
Regulation height of a dart board?
5 feet 8 inches Standard height from the floor to the bullseye on the dartboard is 5 feet 8 inches, while the oche (distance between the front of the board and the toeline) should measure 7 feet 9.25inches.
