answersLogoWhite

0


Best Answer

What is an engine without a cylinder head? Well, nothing much'just a useless metal junk. The cylinder head is an essential component of the engine. It houses water and oil passages for cooling and lubrication purposes. It also covers the cylinder tops and prevents oil from leaking out. A Cylinder Head Bolt is used on numerous points on the head to keep it sealed firmly over the head gasket and the cylinder block.

The main function of these bolts is to hold the cylinder head in place. Cylinder head bolts ensure that the cylinder head will continue to hold up despite the tremendous amounts of pressure in the combustion chamber. These bolts are usually made from stainless steel materials with very high tensile strength and elasticity. Their sizes and shapes also vary, depending on what would best fit your cylinder block.

Despite its small size, the Cylinder Head Bolt is an important part of your engine. It should always be in perfect condition and should be maintained properly. So, if you notice that this part is showing signs of excessive wear, have them replaced immediately. After all, you wouldn't want your engine to merely be a collection of metal junk, would you?

Mahmud<mun1712@live.com><+8801911332459>

User Avatar

Wiki User

11y ago
This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: What is the function of a bolt?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

Are 94 Saturn sl2 transmission compatible with a 95 Saturn sl1 transmission?

If its a manual, it will bolt up and function, but not properly. If its an automatic, it will bolt up and not function at all.


Will a 86 chev 350 heads bolt to 92 350 vortec motor?

They'll bolt up, but not function properly. By the way, the 92 5.7 was not a Vortec engine.


How does the Gewehr 41M rifle work if it is semi-automatic and has a bolt handle?

Bolt handle was provided as a back up in case the semi auto mechanism did not function. Which it frequently did not.


Browning bolt action serial L11549?

Browning.com has a sn function listed under customer service.


What is the age of a Browning A-bolt 300 Win Mag serial 52674NMLS7?

Browning.com has a sn function under customer service.


Can a non abs front hub interchange with a abs hub on a 2007 HHR?

It will bolt in but the abs light will illuminate and the abs will not function.


Will a 86 350 heads bolt to 92 350 vortec motor?

They'll bolt up, but they won't properly function. The 86 engine (not motor) would be carbureted, whereas the 92 engine would have Throttle Body Injection.


How old is a Browning bolt rifle 30-06 cal serial 46693?

Browning.com has a sn function under customer service you can use.


What is the function of a hex bolt?

do you refer to a hexagonal bolt or a hex head bolt one has 6 sides one has 6 points inside the head hex bolt was originally made to replace a 4 sided bolt to make it easier to use hex head were originally made as a secure bolt that could not be removed without e special tool that was not available to the general public do you refer to a hexagonal bolt or a hex head bolt one has 6 sides one has 6 points inside the head hex bolt was originally made to replace a 4 sided bolt to make it easier to use hex head were originally made as a secure bolt that could not be removed without e special tool that was not available to the general public


Where exactly is the tension release bolt for the serpentine belt in a 1992 Le Baron?

It probably has a tension release pully, not a bolt. The pully has no function except tension. Your repair manual probably has instructions on changing the belt and a photo of the small pulley. Mary


What is the function of the bolt on the bushing on the control arm?

To mount the control arm, which needs a bushing to be isolated from the frame so that frame vibrations are not transmitted to the steering column.


What is the use of Squirter washer at moment connection takes place?

A squirter washer eliminates the need for a torque multiplier and torque wrench on structural A325 bolt connections. The indicator function of a squirter washer tells you that the optimal torque for a particular diameter bolt has been met. The second and even more practical function is so that during a visual inspection of the bolt, should vibration or wear cause the nut or bolt to come loose, the indicators retract into the washer, making inspection of a bolted connection a VISUAL, instead of a labor intensive torque check. These washers are in use in the construction and bridge building industry.