Shaft is the handle of the golf club.
A club maker may be able to hammer out the damage internally if it is very minor and near the butt end. If this is not the case you will have to get the club reshafted.
Hosel is the the socket (or neck) in the head of a golf club into which the shaft is inserted.
it is a taylor made golf shaft that has a smaller dia at the bottom of the grip .
No, a golf shaft will fit both right and left handed clubs.
The Hosel (one 's') is the socket or neck in the head of a golf club into which the shaft is inserted.
You might "trim" or shorten the shaft of a golf club if it is too long for the person using it. Basically, the club was designed for a taller person than the one wishing to use it, but it is often cheaper to shorten the shaft of an old club than get a new shaft or new club.
It varies from club to club. It is on one of these; the hosel of the golf club, on the shaft, on the shaft sticker, underneath the grip or somewhere on the head. It is quite easy to find. If you cannot find one, it may not be the original shaft or it simply may not have one.
Nothing it is a brand of shaft, the specs in all shafts differ
All golf clubs are measured in inches. Just a shaft is simply measured top to bottom. When a golf club is assembled, with a head and grip, an iron is measured from the top butt end of the grip to the bottom of the hosel. When a wood is being measured it should be measured to the closest point of the sole to the hosel.