One thing you shouldn't do if you like a soft mesh,
DON'T WET IT!!!!!!
no
When you first get a lacrosse stick,it will be very tight.But, if you look under the stick head, there will be 4 strings. Place a lacrosse ball in your stick head it should make the netting go down. Tighten the strings until the ball is sitting snugly in the stick head.
Probably duck tape
stx crux10 10degree head with stx ripple shaft
To clean a Lax head you take out all of the mesh and then bleach the head.
Right Now its the warrior Noz for the head and the warrior krypto Karbon for the shaft
Plastic
40 inches long for a short stick including the head
Normally the lacrosse head is screwed into the shaft. You can therefore use a screwdriver to unscrew the screw connecting the head to the shaft. once the screw is removed you will be able to remove the head from the lacrosse shaft
Depends on the head shaft and what it is made of as well if it is a defencive stick or attack stick.
ya go crazy, as far as i know there is no regulation about painting or otherwise coloring the head of a lacrosse stick
The shaft in lacrosse is the stick part. The butt is the rubber stopper on the end of the stick. The head is the plastic part which has the pocket. The shaft is the part of the stick where you hold it.