0
What else can I help you with?
Where is the wire for the rear defogger gm?
The model of GM ? Why ? The wire is connected @ the glass element typically , it could be traced back to the front .
When a wire is connected to both terminals of an electrical source is called?
When a wire is connected to both terminals of an electrical source, it forms a closed circuit. This allows current to flow from the source, through the wire, and back to the source, completing the electrical circuit.
Is the hot wire correctly connected to the ground wire in the electrical circuit?
No, the hot wire should not be connected to the ground wire in an electrical circuit.
Where is the crank position sensor on a 1994 Nissan Altima?
the wire connected to the front of the distributo is the crankshaft wire connector follow that wire and it will lead to the crank sensor i believe on the back under the engine
Is the hot wire connected to the line or load terminal?
The hot wire is typically connected to the line terminal.
How does a tv project shows?
it has a projector in the back and itis connected to a wire that leads to things that have all the data. that is how the shows project.
In a hardware loop-back plug which two wire numbers are connected?
1 to 3 2 to 6
Can you wire a external and an internal ground together on a drier?
The ground wire should go from the dryer directly back to the distribution panel. An external ground wire is not required. The ground wire that is in the cord set that is connected to the frame of the dryer and the ground wire that is in the feeders coming from the distribution panel, that is connected to the ground terminal in the dryer receptacle, is all that is required to satisfy the code requirement.
How should the water heater wiring be connected when the red wire is to be connected to the white wire?
When connecting the red wire to the white wire in a water heater wiring setup, ensure that the red wire is securely connected to the terminal marked for the white wire. It is important to follow the manufacturer's instructions and consult a professional if unsure.
What is the wire that is connected to the hood and fastened to the fender?
ground wire, all the metal on the car is where any electricial device can be connected to.
What is Components connected by wire called?
Peripherals are computer components that are connected by wires.
What do fencers use?
All Olympic fencing is electric, which means that the equipment is wired to register on target and off target touches (in order to determine if the touch counts or not), as well as measure the timing between touches (in order to determine whose the touch was). Machines used on the Olympic level also keep the time of the bout and the score. As for the fencers, it depends on the weapon. Foil fencers use lames - vests interwoven with metal wire to conduct electricity - over their standard jacket (which reaches the whole torso and a little bit below in a V shape on the front); Sabre fencers use a similar lame, the main difference being that the Sabre lame does not cover below the waistline, while the foil lame does; epee fencers do not use lames. On the legs, all fencers are required to wear knickers, which protect the thighs, and knee high socks. Pretty much all Olympic fencers also wear fencing shoes, although these are not required. all fencers also wear gloves on the hand weilding their weapon, the only difference being that Sabre fencers' gloves also have the electric mesh used on lames to cover their wrists. for masks, the epee and foil masks are the same, with a gridded metal frame basically covering the front and sides of the head, and a little cloth bib underneath to prevent attacks from going under and hitting the neck and face. The Sabre masks have the lame electric mesh bib, and are attached to the lame through a wire, conducting electricity through both. Both fencers on the strip are connected to the main scoring/timing/touch registering machine through wires which string out behind them and are attached to the machine out of the way of the action. These wires are hooked onto the lame or jacket in the back, and go under the jacket and through the sleeve to connect to the weapon they are holding. When the tip (blade for Sabre) connects with anything, it completes a circuit with the machine and a light goes off. White indicates off target, and a colored light (red or green) indicates a touch on target (resulting in a point). The fencer's lame is also connected (except in epee) to the machine by the wire going through the jacket, which is also hooked up to the lame. Hope this isn't too confusing, I tried to simplify it as much as I could, but still had to use fencing terms and whatnot. Also, although everything is electrified in a sense, everything is completely safe and doesn't electrocute the fencers, even in touching the lame or the weapon. Hope this helps!
