Well the name of the "solder" who killed him was "lead" now what type of "solder" is unknown, but i'd imagine i was probably whatever standard type it is in the CIA.
lead.
Yes. It is a solution indeed
Only non acidic core and non resin core solder may be used. 2mm to 4mm solid solder is recommended.
Silver jewelry requires that you use silver solder for repairs. It is silver based where common solder is lead or tin based. Standard solder is too acidic and will corrode the jewelry. It can probably be found on e-bay. Or ask a jeweler where he or she gets it.
The preferred size and type of solder is 10/18 organic core 0.2 inch diameter. Additionally a 0.075 inch solder wick is used. This is also known as size C.
Rosin core is a type of solder that incorporates a rosin that is used for a flux. The rosin is in a central core of the solder and when the solder melts the rosin cleans the metal of oxides to make a strong and clean connection.
Answering "For what type of fitting would the application of solder wire during the jointing process be required intgral ring or capillary or type a or type b?"
It could be either. Any type of liquid core solder (acid core, rosin core, etc.) is heterogenous, since there's the metal part and the core part. A solid-core solder is probably homogeneous.
A Conductor, SOLDER IS NOT AN INSULATOR. The most common types of solder are made of tin and lead. Another type is silver solder. All of the materials used are metals and are good conductors of both heat and electricity. If you solder something you would notice if you ever held a wire (without protection) while applying solder to it your finger would probably receive a burn (speaking from experience).
with solder
I use 95 % tin 5 % antimony