0
Yes, it is inside the volley ball and when the timer gets to zero it explodes and anyone within a ten metre radius dies.
Wiki User
∙ 11y ago
Add your answer:
Earn +20 pts
What are the four timers used in TCP?
Connection establishment timer, persist timer, keepalive timer, retransmission timer
Is timer a short vowel?
The i in timer is a long vowel and the e in timer has a short vowel.
Is Timer short vowel?
The i in timer is a long vowel and the e in timer has a short vowel.
Is there a timer on the blackberry curve?
it depends on if you mean a camera timer or an overall timer.. if an overall timer then yes. if a camera timer then no, none of the blackberry's have a timer for your camera. but if you go on app world and type in "nux shoot" you will get one, it is completely free and great.
What would happened if you wired a 240v ballast and a 120 v ballast into a heavy duty timer?
The timer has to be multi-pole. The ballast must be connected to the load contacts of the timer. If the timer is a 120 Volt timer, the timer has to run on a 120V. circuit. Loads are loads, and as long as you have a multi-load timer you can hook up whatever you want. If the timer only works on a shared power source (load shares the timer supply) you will need to use a contactor on the load side or the timer.
Volleyball at the Olympics?
Yes, there is volleyball at the Olympics but it is only beach volleyball.
How many digit in a timer?
There are eight bits in a timer.
How do you implement a WD timer in software?
wd timer
What is difference between Mini volleyball and volleyball?
A mini volleyball small and a volleyball is much bigger
What is a programmable timer?
A programmable timer usually just means a timer that can be programmed to go off at any time.
What are the equitments in volleyball?
Kneepads,shorts,volleyball,volleyball net
Why is a timer is used in an electrical circuit?
Timer relays are used in control circuitry. There are two main types, an (off delay) and an (on delay). If you want one device to turn off before the timer controlled device then you would use an off delay timer. If you want one device to turn on before the timer controlled device then you would use an on delay timer. When the timer is energized this starts the timer circuit in the relay to time out.
