To be honest if you have to ask then I would take it to your bike shop. Unless its a high end gyro with the London mod (€200+) then I would personally run a long linear cable.
Yes, but it takes some doing. You have to remove the heaset bearings(the things that the fork turns in), install a piece, then put the bearing back in.
No. The Verde Theory is a BMX bike for riding on a track. A Gyro would only come on a Freestyle bike made for trick riding.
They do not have to be attached to the frame but yes you do need them. When you buy a gyro kit for a bike it comes with a plate that has tabs on it. Unless it is an integrated frame, meaning the headset is two cartrige bearings down inside the frame, if so a gyro will not work without the tabs mounted to the frame. Hope it helped. :)
Depends on what you want from your bike. A MTB is likely to have better riding characteristics than a freestyle bike, important if you want to cover any distances with your bike. But if you only want to ride at skate parks, then a freestyle bike is probably the better choice.
Depends on the gyro and the frame. Some gyros are meant to work with tabs welded onto the headtube of the frame, some have the tabs as part of the press-fit headset cups. You can't put a gyro for welded tabs on a bike that hasn't got them.
If you spin your bars the brake wires will get all tangled up.
yes
check for any obstructions on the frame if there is anything get it off
Gyro pocket
If it's a disc brake bike, then Rotor is another name for the brake disc. If it's a BMX rotor may be another name for gyro / detangler - the thingy that lets you spin the bars on a brake-equipped bike w/o making a mess of the brake wires.
Gyro is pronounce yer-o.
a gyro which is also called a detangler... it surrounds the stem and stops the cables from tangling when doing a bar spin :)
Not unless you have a detangler/gyro fitted. Without one, the brake line would either snap or stop the bars from turning.