0
The general rule of thumb is that one inch of draw length will increase your speed by approximately 10 fps. This will vary from bow to bow and depends a lot on the draw length and poundage being changed.
Wiki User
∙ 14y ago
Add your answer:
Earn +20 pts
How strong is 30'' draw weight?
30" is not a draw weight, it is a draw length. It is the length of the draw from the bow to the string when the bow is drawn.
You bought a used bow the draw length is 30 but you are a 27 can the bow be adjusted for 27?
If it is a compound bow, the type of bow with the pulleys or "wheels" at the ends of the bowlimbs, there should be some way to adjust the draw-length of the bow itself; it may be best to consult someone at an archery shop for the best way to make such an adjustment. When using a Traditional bow -- a recurve or longbow, or other non-compound type -- the only "adjustment" is to simply pull the string back (in this case) to 27 inches; reducing the draw-length in this way also reduces the effective draw-weight of the bow. Also, when using a Traditional bow, and the archer has a longer draw-length than the bow is rated for (i.e., the archer's draw-length is 30 inches, but the bow is rated at 27 inches), it is always advisable to make sure the bow is designed to withstand the longer draw-length. Failure to do so can result in the catastrophic failure of the bow, and possibly serious injury to the archer. Increasing the draw-length of a traditional bow will also increase the effective draw-weight of the bow.
What does MP mean on draw length of bow?
It stands for Multiple draw lengths. You can change the draw length, but you have to provide the modules to do so.
Instructions on draw length of a browning bow?
I have a 1989 Browning Accelerator Plus and I was wanting to adjust the draw length?
What is the draw length of your pse nova bow?
the draw lengthon a nova s7 bow can be adjusted between 27-29 inches
How do I change the draw length on a youth compound bow?
Draw the bow to full draw and hold it. Have your assistant place a nail in the small round hole in the bottom of each pulley wheel and then slowly let the pressure off of the bow string. Unhook the looped bowstring from the metal string connectors and set aside. Slide the connectors up and away from the bow limbs and pull them out of the pulley wheels. Move the connectors to a new hole or position on the wheels (a higher hole if you want the draw length shorter or a lower hole if you want the draw length longer). Reconnect the string to the metal string connectors and draw the bow to full draw again. Have your assistant pull the nails out of the pulley wheels and then let the bow down slowly. This process can also be performed by using a bow press to depress the bow's limbs and then changing the draw length in the same manner.
What is the string length of an xi impulse bow with a 28 to 30 draw length?
Impulse XI 53 7/16 on a 28-30 draw length 56 3/8 on a 30-32 draw length
What bows can you adjust the draw length without a bow press?
****Answers**** Every bow you should be able to adjust that.
When you buy new limbs for a bow does the draw length get longer?
No, it onley gets longer if u change the draw length. Unless you get the wrong kind of limbs.
What determines what length arrow one should get for their bow?
it depends on the draw length of your bow but a 28 inch arrow would most likely last you your whole life
How do you test weight of recurve bow?
Without going to the bow shop, this method requires a hanging scale with a hook. Connect your string and pull down while measuring draw length between the string and handle. when you match your draw length, that is the corresponding weight.
How do you figure out how many pounds of pressure are in a bow of a bow?
You can measure how many pounds it takes to draw the bow by putting a scale on the string at the nock point.
