It will take 1/4 of a second to reach home plate
Approximately 1/2 second.
From home plate to first base is 60 feet. From home plate to the fence is generally around 200 feet.
The center of the batters box is even with the center of home plate. since the plate is 17" long the this means the front edge of the batters box is 27 1/2" in front of home plate and the back edge of the box is 27 1/2" behind home plate.
60 feet and 6 inches
I have found various answers all over. No official dimensions exist but plent of leagues play by it. Some manufacturers call it a "mat" or a "home plate extension" or a "carpet." One league even mandates a gap the size of a softball between the mat and the plate. I'm making my own and we won't be playing with a gap. So, the dimensions I have decided to use to make my own are 17" wide (same as home plate) and 26" long. The notch in it is 8.5" deep to match the shape of the plate. The new total rectangle dimentions including home plate thus will be 17" wide by 34.5" long (8.5" side edge length of the plate + 26" extension).
Based on the official MLB pitching distance of 60' 6" .. it takes .5 seconds for a 100 mph fastball to reach home plate. However, in reality, if the baseball is thrown by a person, it actually reaches the plates quicker because most MLB pitchers are 6'+ and there stride towards home plate will have them releasing the baseball closer than 60' 6".
There is no distance from the batter's box to home plate. The batter's box is adjacent to the 8 1/2 inch side of home plate. They are 4 feet wide and 6 feet long for major league baseball.
There are similar questions for different speeds - easiest way is to scale speed to time. Otherwise, how wide is the home plate?
The distance from home plate to the pitching rubber in high school is the same as it is for the major leagues - sixty feet, six inches.
long enough for the cleaner to be able to reach every part of the pool it aal depends on the position of the vacuum plate.
3' wide 7' long and six inches from the plate. the batters box is 4' from the center of the plate forward and 3' from the center of the plate back
The distance from the pitcher's mound to home plate is 60.5 feet. If the ball would be released exactly from the pitcher's mound, it would take approximately 0.43 seconds. But, if you don't want to count that last part of the windup which takes place from the pitcher's mound until the ball is released from the hand, assuming that that distance is about 5 ft, then it takes approximately 0.4 seconds to reach home plate.
60 feet.The same length from the pitcher's mound to home plate.
Distance From Home Plate to Pitcher's MoundThe distance from home plate to the pitcher's mound in Little League is 46 feet. High School and up is 60 feet and 6 inches (a mistake in measuring long ago but was left that way). Pitcher's mound distances are ALWAYS measured from the front of the rubber to the rear tip of home plate.
Yes it is a forced out as long as you get them in order from 4,3,2,1
It takes .58 seconds for a ball traveling 78 mph to go the 60 ft 6 inches from the pitcher's mound to home plate.
North American plate! :)