0
The lighter it is the more flexible it is, and the quicker the swing speed you can create. It doesn't really matter too much, most of the stock shafts on drivers come at 65-85 grams. You can make them heavier with a piece of lead tape just below the grip, but the drivers come to you designed for maximum performance, so improvement is not really needed.
Wiki User
∙ 13y ago
Add your answer:
Earn +20 pts
Can new graphite driver shafts be replaces with steel shafts?
Yes, they can. However steel shafts that are long enough to be a driver shaft are very uncommon, this is because they are so heavy and not as good as graphite ones. If you find a steel shaft that you would like put into your driver you will need to check the tip diameters are the same and your local pro or clubmaker should be able to do it for you easily.
Got a 80 mph swing what driver shaft do you need?
You should probably use a regular shaft because that is quite a moderate swing speed.
Should the 3 wood shaft be the same as the driver shaft?
yeah it should. Other wise the feeling of both will feel different and most likely you will be hitting every where. Doesnt have to be the same shaft just use same flex.
What does the intermediate shaft do?
The intermediate shaft is the shaft going to the driver side wheel from the tranny. The shaft is suppose to eliminate what you call torque steer, It comes straight from the tranny and bolts to the engine block with a bearing race to hold the shaft and at that brace is where the half shaft, or drive shaft connects to the intermediate shaft and to the driver side hub.
What dos the shaft do?
The intermediate shaft is the shaft going to the driver side wheel from the tranny. The shaft is suppose to eliminate what you call torque steer, It comes straight from the tranny and bolts to the engine block with a bearing race to hold the shaft and at that brace is where the half shaft, or drive shaft connects to the intermediate shaft and to the driver side hub.
How long should a golf driver shaft be if you are 5'9?
You are actually average height. You would be able to use a standard shaft, however if you feel uncomfortable you could get custom fit.
Where is the speed sensor located on a 1991 dodge b250 van?
Driver side tail shaft of the transmission.Driver side tail shaft of the transmission.
How do you you get your driver into the air with trajectory instead of hovering over the ground and rolling out?
You should try and driver which has a higher loft (about 10.5) and probably a regular shaft, this will get the ball in the air for you.
What is the Optimum lenght for shaft on driver?
45"
What is the different between a fairwood shaft and a driver shaft?
there is really no difference except woods are like not as powerful as the driver but the woods can be hit in the fairway not the driver
The outer finish 3 inch section on my golf club shaft is peeling off. Its a graphite shaft Wilson Fireball Graphite Driver. What type of glue should I use to fix it.?
epoxy
What is reverse shaft?
A Reverse Shaft is the shaft which rotates in the opposite direction of the engine driver shaft with the help of meshing of gears mounted on it to the gears mounted on engine driver shaft when reverse gear is applied. The reverse shaft allows the vehicle to move in reverse direction. Sanjay Singh Rathore (ME 3rd year) M.I.T.Mandsaur
