Want this question answered?
The wire that goes to the starter button can be connected to the power wire coming from the battery. Just tough the wire quickly. If the solenoid engages the starter, then it is ok. If not, then there is either no power from the battery of the solenoid is bad.
The starter needs a large wire from the battery and a wire from the starter switch. These are connected to the solenoid that is attached to the starter.
Find the starter and follow the heavy gauge wire from the starter. It will go to the starter relay or battery. If it goes to the relay then follow the heavy wire from the relay which will go to the battery.
where do the wires on the starter go on a 1977 pontiac 400
The small purple wire on the "S" terminal of an older GM vehicle starter would lead to the ignition switch. With the key in the start (crank) position, the purple wire signals the starter solenoid to engage the starter.
it goes from the starter mounting bolt to the battery box.
how do you connect the wire from the alternater to the starter?
The ignition wire in a Nissan 350z is black and red. The starter wire is white/red and the second starter wire is white/green.
The Chevy starter does not have a ground wire, the starter grounds through the starter casing.
red to pos black to neg
It is the ignition wire. The purple wire goes to the small stud on starter.