you cant bad speed senser in one of the wheel bearings is abs light on?
In the 2000 model you press the button just behind the stick shift on the center consel.
The 2000 Cadillac traction control module can be found on each wheel. There is a total of four traction control modules.
where is the fuse for the traction control module located on a 2000 Cadillac Seville
The 2000 Pontiac Firebird is equipped with a traction control switch on the shifting console. The traction control button can be pushed in and out to turn the system on in off.
You should suspect the rear brakes for this one...maybe at their wear limit and keeps the light on....Possibly the front brakes...This IS a 2000 model.
You don't reset the light. The light is on because the Traction Control is turned off. Turn it back on and the light will go off. Look on the shift lever for a button.You don't reset the light. The light is on because the Traction Control is turned off. Turn it back on and the light will go off. Look on the shift lever for a button.
You can switch the traction control system off using the switch to the left of the radio on a 2000 Ford Windstar
On my 2000 model focus, when the light is on permanently, this means the traction control has been turned off.
Traction control
after fixing the whatever abs problems or traction control problems you had the light should go off automatically. if it does not you have not fixed the problem.
To turn off traction control on a 2000 Lincoln Continental, locate the traction control button, which is typically found on the dashboard or near the gear shift. Press the button to deactivate the system; a light on the dashboard should illuminate to indicate that traction control is off. If the button is not present, consult the owner’s manual for specific instructions, as the process may vary. Always remember to reactivate traction control for safer driving conditions when needed.
what does a bcm in a 2000 cavalier control