Best Answer

Well a ring has a steal frame with a spring support in the center with plywood covered by a thin pad then the ring mat and apron only the corners are bolted together and the ropes are tightened from one corner that's the rings I've seen are this way mostly wields but a ring starts from the 4 corners in

User Avatar

Wiki User

11y ago
This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: How do you put back together a wrestling ring?
Write your answer...
Still have questions?
magnify glass
Related questions

How do you install a fuel pump for a 2001 camaro?

you will have to drop the fuel tank as the fuel pump is in the tank, undo the snap ring in top of tank and pry out pump and sending unit BE SURE NOT DAMAGE RING of tank,pull out and switch pumps and put back together make sure all SEALS then put snap ring back in and reassemble

How do you put a rg 38 special back together?

how do you put a .38 special back together

How do you make ring of fire in pocket god?

Put all the jelly fish together and they should form a ring and you just put the pigmy in:)

How do you put back together a Japanese hexagon eraser?

How do you put back together a Japanese hexagon earaser

How do you put drive shaft back together?

mk3 golf tdi 1.9 how to put back together

How do you build a wrestling ring but don't have room?

you can put some pill-0s down and then put a cardbord tube and some string tie the string around the cardbord

Should you put your original belly ring back in i put a dangle one in and now it is infected should i change it back to the one i was pierced with?

if it is infected and you think you should put the original ring back in go to your piercer to see what they think you should do.

How do you put a puzzle ring backtogether?

apparently the instruction book tells you how to put it back together. but if your like us and dont have the book... i guess this is no help!! Here is a video walkthrough:

Do you put the ring back in from top to bottom?

you put it in from the bottom the same way they put it in when you got it done

How do you remove outer cv joint on front axle on 2001 suzuki 500 quad runner?

it as simple as pulling back the cv boot and hammering the joint off. there is a retaining ring on the inside of the joint. when you put it back together just make sure the ring is in good shape.

Will your period come back on if you don't put your nuva ring in?

yes it will.

How could a backyard wrestling ring be setup?

The backyard is a great way to practice one's wrestling moves and have some fun too. First, set up in a flat area that is free from stones and other things that could cause injury, then cut a piece of foam and a piece of plywood to size and glue them together to create the mat. Then, dig holes in the ground at the four corners, put posts in the ground and cover them with foam as well. Attach hooks to each post and string bungee cord or ropes between them to finish the wrestling ring.