0
Loosen your sidewall strings and your string at the bottom of the stick. Push a ball in as deep as you need it and wedge something in there to hold the ball in (a piece of wood might work well). Tighten your sidewalls and bottom string just enough to keep that pocket and remove the wedge holding the ball. You might also have to play with your shooting strings, as your throw might go a little down now.
Wiki User
∙ 16y ago
Wiki User
∙ 14y agoyou beat it with a Lacrosse ball until you get a good pocket formed.
You can also soak it in warm water and then get a ball and put it in there and hold it there for a while. Then you take it out of the water and you can blow dry it or air dry. if you air dry then you might not get the pocket you wanted because it will form differently. While your blow drying it hold the ball in there and it should stay. Also, when you wet it the mesh will be kind of slimy because of the glue stuff coming of on the mesh.
Wiki User
∙ 11y agoIf you don't know how to loosen sidewall strings then you can soak your head and mesh in hot water. Then wedge a ball in the pocket as deep as you like using a pencil or knife to keep it in place. Then let dry. You can also soak it and take a metal pole and push it on the pole and move the head around. Also, most likely when buying new mesh it is easily maneuverable.
Wiki User
∙ 13y agofirst insert a lacrosse ball in ur lacrosse stick next put a pen threw ur mesh and just leave it for a while
Wiki User
∙ 12y agoGrind your ball into the pocket. But make sure you don't make it too deep. Different leagues have different rules about how deep your pocket can be.
Add your answer:
Earn +20 pts
What does a legal girls lacrosse stick pocket look like?
Put the ball in your stick, make your stick eye level. & see if you can see some of the ball over the head of your lacrosse stick. Meaning, that the whole ball is not completely inside the whole stick. If it is inside the whole head of your stick, you need to tighten your netting.
How do you make a lacrosse pocket?
put lotion on the pocket, let it set, and take a ball and work it in. LOLOLOLOLOLOLOLOLOLOLOLOLOLOLOLOLOLOLOLOLOLOLOLOLOLOL=)LOL hey, it's true, and u can use baby oil 2 you can also put your stick between 2 chairs and stick a brick in it over night
What Can you fill a lacrosse stick with to make it heavy?
Sand.
How do you make a bamboo lacrosse stick?
hard work and dedication
How do you make a lacrosse stick out of symbols?
============/----------)---)-}} ===========|------------)---)--)) ============\----------)---)-}} It takes practice and a real lax bro;-)
How do you make a soft mesh lacrosse stick hard mesh?
re-string it with hard mesh.
Why is it better if a lacrosse stick has more stringing holes?
because then u can make it tighter or loose easier
Is it hard to make yellow jackets lacrosse?
It's easy because their lacrosse team isn't very good
How do you make soft mesh hard mesh on a lacrosse stick?
First, you get the pocket to the desired depth, then you spray it with hairspray. Use a hairdryer to dry it quickly than put the whole head in a freezer for 20-30 mins. this makes the mesh stiff. then leave it for about 1 hour to get used to the warmer temperature, then have fun with your new pocket! Enjoy.
How do you make a lacrosse stick longer?
Duck tape another pole(cut however long you want it) onto the end.
What is a lacrosse ball make of?
Mainly white for boys and yellow for girls. The MLL uses orange balls.
If you spraypaint your lacrosse stick shaft will it make it heavy?
It will make it slightly heaver but not much. The paint chip off giving/taking checks from people
