answersLogoWhite

0


Best Answer

If the hosel is broken, it's probably not worth fixing. If the shaft has broken, leaving you with a clubhead with a little bit of shaft down in the hosel, it's not a big deal to re-shaft it. A local Golf shop can do it, or you can use it as your excuse to explore the wonderful world of clubmaking. Best case there's enough of the broken shaft sticking out so that you can grab it with vise-grips. Heat the hosel with a propane torch until the epoxy bond fails, then twist the broken piece out. If not, you can use a shaft extractor, which is like a screw extractor (a.k.a. an easy-out to get a grip on the shaft, then heat it with a torch as before. Either way, once you get the hosel cleaned out, re-shaft as usual.

You can most definitely drill the excess shaft that is broken off in the hosel if that is the case, then if you want, you CAN make an even cut across the old shaft, as low as possible, and use that shaft to reshaft, but that will result in a club up to 2 inches shorter. Regardless, if you do reshaft, find the strongest epoxy you can, because I have been reshafting clubs for a good while and I have given up on the cheap stuff, it just doesn't cut it. (Especially on irons)

Your local pro can and will repair the club if it is worth repairing, but don't bother if it's not worth more than $50-$100.

You can reshaft yourself by drilling out the old piece of shaft left in the head or heat the shaft/head up to break the old glue bond and pull. Find a local place that sells heads, shafts, etc of try www.golfsmith.com. They have a wealth of information.

User Avatar

Wiki User

9y ago
This answer is:
User Avatar
More answers
User Avatar

Wiki User

17y ago

Well, if you are talking about the small black plastic piece that sits where the shaft meets the hosel, which is called a ferrule, than yes. I am assuming that is the piece you are talking about, because if the actual connection wasn't sticking it wouldn't be playable anyway. If the ferrule is loose, you can take a little bit of superglue and stick it back down.

This answer is:
User Avatar

User Avatar

Wiki User

14y ago

If it is on a wood head then no, but you could use a marker pen to colour in the mark to make it less noticable. However it will not affect the playing characteristics in any way, so only if you are worried about it. If it is in a wedge or iron, you can sometimes grind out the dent it it is on a leading edge or the sole of the club.

This answer is:
User Avatar

User Avatar

Wiki User

14y ago

Simple/cheap fix super glue. But you should really take it to your local pro/golf shop and get them to refix the head, this will be will a much stronger epoxy resin. If you have the equipment you could do it yourself, you would need to remove the old head and clean off all the old epoxy. Then prepare the new epoxy place on shaft and twist into the head and leave to dry for about 24 hours.

This answer is:
User Avatar

User Avatar

Wiki User

14y ago

You must mean the ferrule of a club. You can usually knock it back into position with a hammer etc. But if you want a long term fix you can use super glue, or do it properly with golf club epoxy.

This answer is:
User Avatar

User Avatar

Wiki User

14y ago

If the actual head is coming off the club you can either take it to your local pro or golf shop and get them to refix the head, this is a very inexpensive process. If however the ferrule is coming lose, you can simply glue it back with shaft epoxy, however, the ferrule is used for cosmetic purposes only, so if you are unable to glue it, you do not need to worry.

This answer is:
User Avatar

User Avatar

Wiki User

15y ago

A clubhead can be reattached with an epoxy glue. Any proshop or golf store can do this for a nominal fee.

This answer is:
User Avatar

User Avatar

Wiki User

15y ago

The local golf course might have someone who repairs clubs

Local golf shops

Golfsmith if you have one near by

This answer is:
User Avatar

User Avatar

Wiki User

11y ago

If this is gluing the shaft into the head, epoxy is best.

This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: Can you still use a golf club if the piece connecting the shaft and the head no longer sticks?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

Put a blade into a tapered shaft?

A replacement blade can be put into a tapered shaft as long as the blade has a tapered hosel. A standard hosel blade will not fit into a tapered shaft. The tapered shaft must also actually be a shaft and not a recently broken one-piece stick. Some players try to cut broken blades off of one-piece sticks and then think they can replace the blade in the remaining shaft. This can work in principle but only at the expense of the natural performance of the stick. It is generally not recommended.


Is the distributor shaft on a 1984 b2000 one solid piece?

Yes it is a one piece shaft.


How many u-joints on a 2002 dodge ram 1500 quad cab?

The front axle shaft will be cv style, so zero there.The front drive shaft would have three.The rear drive shaft would have two if it is a one piece shaft, three if a two piece shaft.The front axle shaft will be cv style, so zero there.The front drive shaft would have three.The rear drive shaft would have two if it is a one piece shaft, three if a two piece shaft.


What does a thrust washer do?

Thrust Washer stop the play of the connecting rods on the crank shaft.


What is shaft sleeve?

A shaft sleeve is a piece of metal tubing placed over the shaft to protect as it passes through the packing area.


Can you shorten the drive shaft to fit a longer shaft on the transmition?

this requires a drive shaft company that can cut and weld it and balance it after.


Can you swap drive shaft 06 silverado to a one piece?

You would need a drive shaft from a suburban


Advantages of using 2 piece prop shaft arrangement?

1) More torque can be put through the shaft 2) Can be used on longer Vehicles Without the whiping effect Akray


Can you use metal hockey sticks?

In ice hockey, sticks may incorporate metal, and aluminum is a common choice to make the whole shaft from. In field hockey, metal is banned from use in sticks for safety reasons.


Connecting rods connect the piston to what?

The connecting rod has a "wrist pin" which goes through the side of the piston and through the connecting rod. It is one of the most critical fit parts of an engine.The connecting rod or con rod connects the piston to the crank or crankshaft!!!


What is the difference between a 350 Chevy crank shaft and a 400 crank shaft?

400 has a longer stroke


Does a stx duece head fit on maverick bazooka shaft?

almost every head fits on every shaft. Excluding the kyle harrison sticks and head which have a tilt and only work on the stx cranckshaft 10degree shaft