It depends on the gun and adapter but usually you have to insert it seal first into the area where the pin is (there will be an oring there). Usually you have to screw something in to pierce the seal, but there could be a lever or other device instead. The other method is you unscrew the charger from the gun, drop the co2 cartridge in, and screw it back on.
You need to buy what's called a 12 gram changer. Or if your maker has an open port for the 12 gram cartridge, you can buy what is called a "dummy" 12 gram, which fits into the port, but allows a remote to be attached, which can be attached to a regular CO2 tank.
The top of a CO2 canister isn't very thick. It will take about a half a pound of pressure to break through the top.
one day
CO2
To start a co2 dragster, you just simply shoot the co2 canister and then the co2 dragster will go.
At 70 degrees F, CO2 obtains a gas pressure of 852.8 psi when confined in a vessel
You can recycle it.
All Co2/HPA tanks will fit any marker. Co2 cartridges will not.
[ 34.3(gC3H8) / 44(g/mol C3H8)] * [ 3mol CO2 / 1molC3H8 ] * 44(g/mol CO2) = 103 gram CO2
unscrew the tank, this will vent any co2 that is in the marker out the asa
trees convert CO2 to O2. CO2 is the cause of the warming The less trees there are to convert CO2, the more CO2 there will be
You cant, the CO2 that is in the marker is vented out when you take the tank off.
Yes, the largest CO2 tank, the 24 oz can fit on the Brass eagle Raptor or any marker for with standard ASA threads. However not every marker can use Co2.