A rifle that has barrel removed- not likely. Revolver that has barrel removed- VERY likely.
Use a cloth swab threaded through the tip of a gun cleaning rod and swipe it through the barrel. Then take a clean one and do it again until all the oil is removed.
Use an empty water bottle, make a hole at the bottom big enough to fit in tightly your gun's barrel, and attach it to the barrel with duct tape. This should reduce the amount of noise made. Or, tighten the screw of your gun's gear box.
Oxidation of the steel of a gun barrel.
No. If it is the actual shaft of the barrel that is broken there is no repair, and if you were going to use it on the threads, it will not hold. Even if it were to, it would not match up and break paint in the barrel.
Flower in the Gun Barrel was created in 2008.
The gun barrel is the metal part that the bullet comes out of.
A barrel is part of a gun
Barrel of a Gun - Guster song - was created in 1998.
You will have to replace the barrel
The barrel is usually above the centerline of the gun. When fired, recoil pushes straight back from the line of the barrel, but that is offset above the centerline, and causes the gun to pivot.
Sorry, but we need more information on the term "round barrel gun".