0
Most single-speed bikes(particularly BMXes) use a chain that is 1/8" wide. Chains are always bought a bit too long, and then cut to size. Use a chain breaker tool.
No one can tell you how many links you need, it depends on the chainwheel/sprocket combo and the size of the frame.
Wiki User
∙ 13y ago
Wiki User
∙ 13y agoPretty much whatever you feel like. Do you want to go faster, but can't spin the cranks any faster? Get a smaller one. Do you feel like it's hard to get the bike moving? Get a bigger one.
Wiki User
∙ 14y agoGo for a SS (singlespeed) chain. It measures 1/8"
Wiki User
∙ 14y agoA nine tooth sprocket is a great combination
Add your answer:
Earn +20 pts
What size sprocket can a 9 tooth driver fit on?
a 25 tooth sprocket will fit on a 9 tooth driver
I need 9 tooth sprocket on my BMX bike for the back do I need a driver or can I just put a freewheel on and what do I need know about fitting it I know about the chain stuff already?
You can get a 9 tooth sprocket, you will need a conversion kit to do it. Haro makes a decent one just do a search for Haro 25/9
What size driver fits on a 25 tooth sprocket?
9 tooth driver
What is the sprocket size to the hyper mike spinner pro model bike?
25/9 gear ratio
I have a 25 tooth sprocket what tooth cassette do i need?
a 9 will do but an 8 would be better
Can you use a 25 tooth sprocket and a 8 tooth drive?
no you can not 25 with 8
What does 25t mean when talking about a bike sprocket?
25t means that there is 25 of the little spikey teeth on the outside of the sprocket :]
If you want a 25 tooth sprocket on your bike and you have a free wheel driver do you need a new rim?
you never need a new rim its only the hub you change
What size is 25-9 chain for bmx bike?
It depends on the length of the chainstays on your frame.
What size chain for ms 381 stihl chainsaw?
20 inch upto 25 inch
How do you calculate sprocket rpm?
calculating sprocket RPM is very easy if you know what the RPM of the drive sprocket is. If you know that then it is a simple fraction problem. If you make the drive gear the numerator or the top part of the fraction and the driven gear the denominator or the bottom part of the fraction (DRIVE/DRIVEN) I.E. if the drive sprocket has 25 teeth and your driven sprocket has 100 teeth (25/100) that will reduce to (1/4) or a 4:1 ratio. So if your drive sprocket is spinning at 1000 RPM then your driven sprocket will be spinning at 250 RPM. You can plug your specific sprocket tooth count into that equation and come up with the right answer.
What shoe size would a 25 cm foot need?
8 indian size
