answersLogoWhite

0


Best Answer

You pour them carefully from the bag into the hopper.

User Avatar

Wiki User

11y ago
This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: Can you put paintballs in a spyder MR5?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

Can you use different paintballs in an opus-a kingman spyder?

No. only .50 caliber paintballs.


How many paintballs per second does a spyder pilot shoot?

About 8-9. Possibly 10-11 with an electric loader.


How many paintballs per second does the spyder pilot shoot?

08 model is capped at 13 on semi 09 model is capped at 15 on semi


How many paintballs can a spyder victor 3000psi marker shoot with a 16oz tank?

You are looking at around 500 shots. Victors are not the most efficient markers out there, especially with Co2


Can the semi-automatic spyder mr1 shoot automatic?

Yes but you are going to have to get an E-trigger and it is well known for chopping paintballs unless you get some eyes and a decent hopper.


What size of paint balls do spyder paintball guns use?

In U.K, the paintball fields set them at 270 FPS, but when you buy the gun it should be around 300 FPS, you can buy chrongraphs for $10-20 to test the FPS,


What is EYE on spyder paintball guns?

the eye is not specific to a spyder....it is in all decent guns. it is a infra-red light that is in the chamber where the paintball is ready to fire, it senses when it's beam has been broken and it only allows the gun to shoot when the ball is all the way in the gun...this makes chopping paintballs a thing of the past.


How do you put an elbow on the Spyder Pilot 09?

The Spyder Pilot is center fed, so there is no need for elbows. Also no spyder elbows would fit because of the new style of threaded feed necks.


How do you put a spyder stock on a spyder paintball gun?

Disassemble the gun, and replace the back cap with the stock or take it to a paintball store, and ask them to.


How do you fix a Spyder MR1 to keep the paintballs from rolling out of the barrel?

It sounds as if the air is not reaching the regulator. But your first bet would be to take the bolt out and lube it (you never know). After the bolt, check the O-rings of everything. Sometimes they snap off. After that check your macro line and make sure it is connected to the reg. If all else fails, send it by to Spyder.


When did the Mitsubishi Eclipse Spyder first enter production?

The second generation Mitsubishi Eclipse was put into production from 1995 to 1999. The convertible model called the Mitsubishi Eclipse Spyder was put into production in 1996.


When was A Fistful of Paintballs created?

A Fistful of Paintballs was created on 2011-05-05.