0
Unfortunately not, or at least not in any reasonable manner... It's one thing to get a spacer made for the tube welded to the frame which would allow you to use a smaller-than-stock bottom bracket but to go larger you'd literally have to cut the bottom bracket housing off of your current frame, grind the connecting pipes to a larger radius and then weld a larger bottom bracket housing in place of the original small diameter housing.
Keep in mind that if you decide to try this, the frame MUST be made of steel. Carbon fiber or Aluminum will be a disaster. However, as I mentioned earlier this will NOT be a fun ordeal and unless you have extensive welding (and cutting) experience it won't go well.
Wiki User
∙ 11y ago
Add your answer:
Earn +20 pts
Spanish bottom bracket measurements?
19mm or 22mm
How do you tell if your bottom bracket is 19mm or 22mm?
The difference is the size of the hole in the center of the bearing. A 19mm bottom bracket will fit a 19mm crank spindle (profile cranks have a 19mm spindle). A 22mm bottom bracket will have a hole in the center that is 22mm. a 22mm spindle (eclat tibia cranks have a 22mm spindle) will fit in the 22mm bottom bracket. The size of the bottom bracket needed depends on the size of your crank's spindle size.
What is better a 19mm crank axle or a 22mm crank axle?
A 22 mm crank axle
What size Socket is used for the crank pulley of a 2.5 4-cylinder?
it would be a 19mm or a 22mm
How do you change a strut bearing on your mk1 Renault clio?
remove the 22mm bolt at the top that holds the strut to the car DO NOT REMOVE THE 19MM NUT ON THE STRUT ITSELF UNLESS YOU HAVE USED A SPRING COMPRESSOR TO RELIEVE TENSION OF THE SPRING
Which is more 19mm or 19km?
19mm
How many cm in 22mm?
There are 10mm in 1cm so, 22mm = 2.2cm
How many meters is 19mm?
19mm is 0.019 meters.
What size olive do you use for a 22mm copper pipe?
An olive is a compression fitting used in plumbing. you would use a 22mm olive. you would use t in conjunction with a 22mm compresion fitting Before you use a 22mm olive make sure the pipe you are using the 22m fitting on IS 22mm and NOT 3/4. If it is 3/4 then you need a 3/4 olive from your merchants but they fit inside a 22mm compression fitting.
Weight of 19mm 19mm square tube?
The answer will depend on what the tube is made from and how thick its walls are.
How big is a 22MM?
2.2 cm
How thick is 22mm?
0,86 inches
